The Eclipson Delta Dart is a high-performance twin-EDF delta designed around extreme maneuverability, thrust vectoring and aggressive aerobatic flight. Powered by two 50 mm EDF units, the Delta Dart combines high-speed performance with differential thrust and a thrust-vectoring system capable of dramatic pitch changes, high-alpha flight and post-stall maneuvers.
A servo-controlled launch dolly keeps the aircraft secure during the takeoff run and releases once airborne, eliminating the weight and drag of permanent landing gear. The hybrid printed construction uses LW-PLA, PLA+ and TPU to balance weight, strength and durability throughout the airframe.
With its wide delta planform, twin EDF power and advanced control setup, the Delta Dart is one of the most technically advanced aircraft in the Eclipson lineup and is best suited for experienced RC pilots.
Kit Content / Important Information
This listing is for a 3D-printed airframe kit only.
Electronics, EDF units, ESCs, servos, battery, receiver, transmitter, pushrods, hardware, adhesives and other required components are not included unless specifically stated otherwise.
The Delta Dart requires two 50 mm EDF units, two ESCs, five servos and a minimum 7-channel radio system.
The model is designed primarily around a hybrid construction using approximately 600 g of LW-PLA, 500 g of PLA+ and 40 g of TPU.
Some parts may require normal cleanup, trimming, sanding or fitting during assembly. Minor cosmetic variations are normal with FDM 3D printing and do not affect the intended operation of the aircraft.
Assembly is required.
Official assembly instructions and supporting documentation are provided by Eclipson.
Skill Level: Advanced
The Delta Dart is not recommended as a first RC aircraft. Twin EDF power, thrust vectoring, differential thrust and the advanced radio setup make this model best suited for pilots already comfortable with fast, responsive aircraft.
Printed in the USA by The Ravens Forge.
We Make Things Fly!
The Eclipson Delta Dart is a high-performance twin-EDF delta designed around extreme maneuverability, thrust vectoring and aggressive aerobatic flight. Powered by two 50 mm EDF units, the Delta Dart combines high-speed performance with differential thrust and a thrust-vectoring system capable of dramatic pitch changes, high-alpha flight and post-stall maneuvers.
A servo-controlled launch dolly keeps the aircraft secure during the takeoff run and releases once airborne, eliminating the weight and drag of permanent landing gear. The hybrid printed construction uses LW-PLA, PLA+ and TPU to balance weight, strength and durability throughout the airframe.
With its wide delta planform, twin EDF power and advanced control setup, the Delta Dart is one of the most technically advanced aircraft in the Eclipson lineup and is best suited for experienced RC pilots.
Kit Content / Important Information
This listing is for a 3D-printed airframe kit only.
Electronics, EDF units, ESCs, servos, battery, receiver, transmitter, pushrods, hardware, adhesives and other required components are not included unless specifically stated otherwise.
The Delta Dart requires two 50 mm EDF units, two ESCs, five servos and a minimum 7-channel radio system.
The model is designed primarily around a hybrid construction using approximately 600 g of LW-PLA, 500 g of PLA+ and 40 g of TPU.
Some parts may require normal cleanup, trimming, sanding or fitting during assembly. Minor cosmetic variations are normal with FDM 3D printing and do not affect the intended operation of the aircraft.
Assembly is required.
Official assembly instructions and supporting documentation are provided by Eclipson.
Skill Level: Advanced
The Delta Dart is not recommended as a first RC aircraft. Twin EDF power, thrust vectoring, differential thrust and the advanced radio setup make this model best suited for pilots already comfortable with fast, responsive aircraft.
Printed in the USA by The Ravens Forge.
We Make Things Fly!